- Product Categories
- Magnetic stirrer
- Temperature control device
- Microwave chemical reactor
- Glass reactor
- Cryogenic cooling circulati..
- Rotary evaporator
- Friendly Links
Precautions collector-type magnetic stirrer should be noted
2014-01-14 Reads : 3
1, the instrument should be kept clean, long-term need to be cut off. 2, the heating time is generally not beneficial for too long, the gap using the extended life of the machine. 3, please use the use-phase safety magnetic stirrer collector outlet is properly grounded. 4, the position is correct, whether there is abnormal debris into the mixing head stuck inside the machine. 5, in order to ensure safety and prevent electrical injury, please use a tripod socket connected to the safety ground. 6, stir stir found not synchronized beating, or not running, you should cut off the power, check the bottom of the container is flat join the pot, then heat up. 7, when the stainless steel container and did not join HTF temperature sensor is not connected, please do not open the temperature control switch, in order to avoid damage to the heating tube and heated table.
keywords: Collector-type magnetic stirrer,
Admin>>>
You are the 8402 visitor
Copyright © GuangDong ICP No. 10089450, Shanghai Cheng Wu Instrument Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 8402 visitor
Copyright © GuangDong ICP No. 10089450, Shanghai Cheng Wu Instrument Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility